Family-owned flooring & remodeling in Dallas Fort WorthMon to Fri 9am to 6pm, Sat 9am to 2pm(214) 903-4378 · Free quote
Free Estimate

Hardwood Flooring Installation in Dallas, TX

Real wood, installed the right way. Solid and engineered hardwood from a family-owned DFW team with 12+ years of experience, moisture testing on every job and a price match guarantee.

Key facts

  • Species: red and white oak, hickory, maple, walnut and wide plank engineered
  • Methods: nail-down, glue-down and floating, chosen for your subfloor
  • Typical timeline: 2 to 5 days for most homes
  • Included: moisture testing, subfloor prep, removal, trim and clean-up
Refinished red oak hardwood floor in a Dallas Fort Worth living room

There is a moment every hardwood customer remembers: the first morning walking barefoot across a brand-new oak floor with coffee in hand. That feeling is what we install. Paradise Spaces has spent more than 12 years putting real wood under the feet of Dallas Fort Worth families, from Lakewood bungalows to new builds in Frisco, and we sweat the details so your floor looks just as good in year twenty as it does on day one.

Solid or engineered: the honest answer

Both are real wood. The difference is what is underneath.

Solid hardwood Engineered hardwood
Construction One piece of wood, usually 3/4 inch Real wood wear layer bonded to a cross-ply core
Best over Plywood or OSB subfloors, pier-and-beam Concrete slabs, radiant heat, any level of the home
Seasonal movement Higher; needs stable humidity Low; the core resists cupping and gapping
Refinishing Many times over its life 1 to 3 times, depending on wear layer thickness
Widths Typically up to 5 inches Wide plank 7 to 10 inches and beyond

Most DFW homes sit on concrete slabs, so engineered hardwood is the go-to choice for slab houses. In older pier-and-beam homes across Dallas and Fort Worth, solid hardwood is the classic choice and can be refinished for generations.

The technical side we never skip

North Texas humidity swings from muggy spring storms to bone-dry winter heat. Wood reacts to every change, so our process follows the National Wood Flooring Association installation guidelines:

  • Moisture readings on wood and subfloor. For most strip flooring, the wood should be within 4 percent of the subfloor moisture content, and within 2 percent for wide plank.
  • Slab testing. On concrete we measure moisture before anything goes down and use the right vapor retarder or moisture-cure adhesive for the reading.
  • Flatness. Subfloors are brought within manufacturer tolerance (commonly 3/16 inch over 10 feet) by grinding high spots and filling low ones.
  • Acclimation and layout. Boards are acclimated when the product calls for it and racked out from several boxes so color and length are spread naturally.
  • Expansion space. Proper gaps at walls and transitions are hidden under baseboard and quarter round so the floor can breathe.

Finishes and stains that make the room

Prefinished floors arrive with a factory-cured aluminum oxide finish, so you can walk on them the same day. Site-finished floors are sanded smooth after installation and stained to the exact color you want, then sealed with water-based or oil-modified polyurethane in matte, satin or semi-gloss. Popular DFW looks right now include natural white oak, warm honey tones and soft greige.

What is included

Free in-home estimate, furniture moving, removal and haul-away of old flooring, subfloor preparation, installation, stair nosing and transitions, baseboard or quarter round, and a full clean-up. Prefer to shop yourself? We also offer install-only service.

Why homeowners pick Paradise Spaces

  • In-house discounted products sourced directly from manufacturers, so you pay less for better wood
  • Price match guarantee on equal material and scope from DFW competitors
  • Our own crews, not a rotating cast of strangers
  • Matching stairs in the same species and stain; see stairs and balusters

What drives the price

Species and grade, plank width, solid versus engineered construction, prefinished versus site-finished, the amount of subfloor leveling, removal of old flooring, and stairs all affect cost. Wide plank white oak with a site-applied finish sits at the top of the range; prefinished engineered oak in standard widths is often the sweet spot for value. Your estimate shows each item separately so you can adjust choices before you commit.

Frequently Asked Questions

How long does hardwood flooring installation take?

Most homes take 2 to 5 days for prefinished floors. Site-finished floors add sanding, staining and finish coats, so plan for a few extra days plus cure time.

What is the best hardwood for the Dallas climate?

Engineered hardwood is the most stable choice for slab homes and humidity swings. White oak and hickory are hard, handsome and very popular. In pier-and-beam homes, solid oak performs beautifully with steady indoor humidity.

Can hardwood be installed over a concrete slab?

Yes. Engineered hardwood can be glued down or floated over a slab after moisture testing. Solid hardwood usually needs a plywood subfloor over the slab.

How much does hardwood flooring cost in Dallas?

Cost depends on species, width, grade, finish, subfloor prep and stairs. Your free estimate gives a written, itemized price, and our price match guarantee applies.

Can you match my existing hardwood?

Often, yes. We match species, width and stain closely, and for a seamless look we can weave new boards in and refinish adjoining rooms together.

How do I care for new hardwood?

Use felt pads on furniture, a microfiber mop with a wood-safe cleaner, mats at entries, and keep indoor humidity steady (many manufacturers recommend about 35 to 55 percent). Avoid steam mops and wet mopping.

Related Services

Ready for floors you will love?

Free in-home estimates across Dallas Fort Worth. Price match guarantee on materials and installation.

Get a Free EstimateCall (214) 903-4378
Call (214) 903-4378Free Estimate